Skip to main content
Mole viewing routes

muti-metroo routes

Deprecated. Use muti-metroo route status instead. The top-level routes command will be removed in a future release. Same data, same flags.

Display the current routing table showing how traffic reaches exit agents.

# View routes on local agent
muti-metroo routes

# View routes on remote agent
muti-metroo routes -a 192.168.1.10:8080

# JSON output for scripting
muti-metroo routes --json

Usage​

muti-metroo routes [flags]

Flags​

FlagShortDefaultDescription
--agent-alocalhost:8080Agent HTTP API address (host:port or http(s):// URL)
--jsonfalseOutput in JSON format

Example Output​

Route Table
===========
NETWORK              NEXT HOP        ORIGIN          METRIC   HOPS
-------              --------        ------          ------   ----
10.0.0.0/8           Agent-B         Agent-C         2        2
192.168.1.0/24       Agent-B         Agent-B         1        1
0.0.0.0/0            Agent-C         Agent-C         1        1

Total: 3 route(s)

Output Fields​

FieldDescription
NETWORKCIDR that this route handles
NEXT HOPImmediate peer to forward traffic to
ORIGINExit agent that advertised this route
METRICTotal hop count to reach exit
HOPSSame as metric

JSON Output​

muti-metroo routes --json
[
  {
    "network": "10.0.0.0/8",
    "next_hop_id": "abc123...",
    "next_hop_name": "Agent-B",
    "origin_id": "def456...",
    "origin_name": "Agent-C",
    "metric": 2,
    "hop_count": 2,
    "path_display": ["Agent-B", "Agent-C"]
  },
  {
    "network": "192.168.1.0/24",
    "next_hop_id": "abc123...",
    "next_hop_name": "Agent-B",
    "origin_id": "abc123...",
    "origin_name": "Agent-B",
    "metric": 1,
    "hop_count": 1,
    "path_display": ["Agent-B"]
  }
]

Route Selection​

When traffic needs to reach a destination, routes are selected using longest-prefix match:

  1. Most specific CIDR wins: /24 beats /16 beats /8 beats /0
  2. If tied, lowest metric wins: Fewer hops is preferred

Example for destination 10.1.2.3:

  • 10.1.2.0/24 (metric 3) beats 10.0.0.0/8 (metric 1) - more specific
  • If two /24 routes exist, the one with lower metric wins

Understanding the Output​

Direct Routes (Metric 1)​

192.168.1.0/24       Agent-B         Agent-B         1        1

This route goes directly to Agent-B (next hop = origin). Traffic for 192.168.1.x is forwarded to Agent-B, which handles it as an exit.

Multi-Hop Routes (Metric > 1)​

10.0.0.0/8           Agent-B         Agent-C         2        2

This route reaches Agent-C (origin) via Agent-B (next hop). Traffic for 10.x.x.x is forwarded to Agent-B, which forwards it to Agent-C.

Use Cases​

Verify Route Availability​

# Check if routes exist for your target network
muti-metroo routes | grep "10.0.0.0"

Debug Routing Issues​

# See full route table to diagnose connectivity
muti-metroo routes

# Check route count matches expectations
muti-metroo routes --json | jq 'length'

Monitor Route Changes​

# Watch for route changes (requires watch command)
watch -n 5 'muti-metroo routes'

Troubleshooting​

No Routes in Table​

If muti-metroo routes shows no routes:

  • No exit agents are configured in the mesh
  • Routes haven't propagated yet (wait for advertise interval)
  • Network connectivity issues between agents

Missing Expected Route​

If a specific route is missing:

  • Check the exit agent is running and connected
  • Verify the exit agent has the route configured
  • Trigger route advertisement: curl -X POST http://exit-agent:8080/routes/advertise